TOP > コンピュータ > https://www.pc-laptop.co/道場 > ネタ

道場TOP ネタ一覧 https://www.pc-laptop.co/道場

HP 732811-001 adapter Replacement

◇評価 0ポイント
◇閲覧回数 205
◇登録日
2025年10月10日
sparrow11
sparrow11
道場主

Lv.25

Check

前のネタへ
次のネタへ
HPQ17796
  • Brand : HP Adapter
  • Type : GSB194
  • Capacity : 100V-240V 2.0A 50-60Hz
  • Voltage : 19.5V 6.15A 120W
  • Encoding : HPQ17796

732811-001 Alternate with the following models:

732811-001 710415-001 HSTNN-LA25 HSTNN-CA25 PA-1121-62HA

The product HP 732811-001 is perfectly compatible with the product model HP ENVY15 ENVY17 8560W 709984-003 HSTNN-DA25 Charger :

Input:100V-240V 2.0A 50-60Hz
Output:19.5V 6.15A 120W
Connector Size:4.5mm with Blue Tip on Center
HP Envy 17-j000/17-j100/17t-j1000 Series
HP Envy 17-j000eb HP Envy 17-j106tx
HP Envy TouchSmart 15-j00O Sereis
HP Envy 15-j059nr HP Envy 15-j092nr HP Envy 15-j002la
HP Envy 15-j003a HP Envy 15-j004la
HP OMEN 15-5000 5010 5014TX 5016TX
HP Omen 15-5000 15-5010NR Series
HP OMEN Pro 15,M2T34AA Mobile Workstation
HP OMEN Pro 15 Mobile Workstation Notebook
HP Omen Pro 15 M2T37AA
HP Omen Pro M2T39AA
HP Omen 15-1502na
HP Omen 15-5110nr
HP Omen 15-5001na
HP Omen 15-ax008ng
HP Omen 17-w012ng
HP Envy 15-ae15030tx
HP Envy 15-ah00sa
HP Envy 17-n107ng
HP Envy 17-r100ur
HP OMEN Pro 15,L9H60UT Mobile Workstation
HP 120W 4.5*3.0MM All Series.


Maintenance and instructions for the HP 732811-001 adapter:

1. Wiring is exposed. If the cable is worn in any way, this may result in some internal cable exposure. If the cable is severely worn and the cable is exposed, the adapter should be stopped.
2. The cable is broken. A cable break may occur in the flexible connector near the adapter module or connector. These flexible joints are used to bend the cable when the adapter module is wound, but may become brittle over time, causing breakage. If the cable hits the edge of an object such as a table or stool, it may also break.
3. The stitches are bent or broken. If the computer port is not properly inserted, the adapter pins may bend or break completely. Unplugging or inserting the cable at an angle may cause the center pin of the adapter to bend. If this happens frequently, the pins may break and the adapter will stop working.
4. The cable is loose. If your cable is loose, try unplugging the cable and reconnecting it to make sure it is in place. If the cable is still loose, check for broken or broken pins or connectors or cables. If the cable is damaged and it is loose, you must replace the adapter or cable.
5. The cable is worn. Cable wear is most likely to occur at either end of the cable connecting the adapter module to the connector that connects to the computer. This may be due to the number of times the cable wraps around the adapter module or the cable is subjected to any unnecessary stress.

You may also want to see this adapter:

【このネタに対するあなたの評価は?】
☆☆☆☆☆ ☆☆☆ ☆

ブログ? そんなの必要ありません! 今日から、いきなりアフィリエイトスタート!

【まにあ道アフィリエイト】まにあ道ならAmazonアソシエイトIDを利用してネタを書くだけで、お気軽に始めていただけます。