ネタ | www.built-in-battery.nl/道場 | コンピュータ | まにあ道

Buy New Replacement PA-3401-1 adapter, Power Cord included. Works for HP Pro 288 86 99 Pro G2 G4 G5 MT Power Supply and many more. Warranty & Fast Shipping. We are the real manufacturer for HP PA-3401-1 adapter ,and we believe that our products are your best choose.

• Brand : HP
• Alternate with the following models : PA-3401-1
• Cell technology :
• Capacity : 100-240V-5.2A 50-60Hz
• Voltage : 400W
• Encoding : HPQ17994_Se

Online Store:

• JP: HP PA-3401-1 アダプター
• IT: HP PA-3401-1 adattatore
• AT: Akkus HP PA-3401-1 Ersatzbatterien zu verkaufen

Maintenance and instructions for the HP PA-3401-1 adapter:

1. Wiring is exposed. If the cable is worn in any way, this may result in some internal cable exposure. If the cable is severely worn and the cable is exposed, the adapter should be stopped.

The cable is broken. A cable break may occur in the flexible connector near the adapter module or connector. These flexible joints are used to bend the cable when the adapter module is wound, but may become brittle over time, causing breakage. If the cable hits the edge of an object such as a table or stool, it may also break.

2. The stitches are bent or broken. If the computer port is not properly inserted, the adapter pins may bend or break completely. Unplugging or inserting the cable at an angle may cause the center pin of the adapter to bend. If this happens frequently, the pins may break and the adapter will stop working.

3. The cable is loose. If your cable is loose, try unplugging the cable and reconnecting it to make sure it is in place. If the cable is still loose, check for broken or broken pins or connectors or cables. If the cable is damaged and it is loose, you must replace the adapter or cable.

4. The cable is worn. Cable wear is most likely to occur at either end of the cable connecting the adapter module to the connector that connects to the computer. This may be due to the number of times the cable wraps around the adapter module or the cable is subjected to any unnecessary stress.

You may also want to see this battery

• HP PA-3401-1 HP Pro 288 86 99 Pro G2 G4 G5 MT Power Supply
• AUTEL MS906 AUTEL Maxisys MS906 MS906BT MS906TS MS908 MS908P
• TOPCON BC-30 Dual TOPCON BT-65Q BT-65Q BT-62Q BT-66Q BT-61Q BT-60Q
• TOPCON BC-30 TOPCON BT-65Q BT-65Q BT-62Q BT-66Q BT-61Q BT-60Q
• DELL H265AM-00 Dell Optiplex 3010 7010 9010 390 790 990 MT

编号1： AUT17947_Altri

标题：

• AUTEL MS906 adapter Replacement
• adapter for AUTEL Maxisys MS906 MS906BT MS906TS MS908 MS908P
• MS906 adapter 100V-240V 12V 3A 36W
• AUTEL adapter MS906
• Buy new replacement parts AUTEL MS906 adapter

Tag：

内容：

Buy New Replacement MS906 adapter, Power Cord included. Works for AUTEL Maxisys MS906 MS906BT MS906TS MS908 MS908P and many more. Warranty & Fast Shipping. We are the real manufacturer for AUTEL MS906 adapter ,and we believe that our products are your best choose.

• Brand : AUTEL
• Alternate with the following models : MS906
• Cell technology :
• Capacity : 100V-240V
• Voltage : 12V 3A 36W
• Encoding : AUT17947_Altri

Online Store:

• JP: AUTEL MS906 アダプター
• IT: AUTEL MS906 adattatore
• AT: Akkus AUTEL MS906 Ersatzbatterien zu verkaufen

Maintenance and instructions for the AUTEL MS906 adapter:

1. Wiring is exposed. If the cable is worn in any way, this may result in some internal cable exposure. If the cable is severely worn and the cable is exposed, the adapter should be stopped.

The cable is broken. A cable break may occur in the flexible connector near the adapter module or connector. These flexible joints are used to bend the cable when the adapter module is wound, but may become brittle over time, causing breakage. If the cable hits the edge of an object such as a table or stool, it may also break.

2. The stitches are bent or broken. If the computer port is not properly inserted, the adapter pins may bend or break completely. Unplugging or inserting the cable at an angle may cause the center pin of the adapter to bend. If this happens frequently, the pins may break and the adapter will stop working.

3. The cable is loose. If your cable is loose, try unplugging the cable and reconnecting it to make sure it is in place. If the cable is still loose, check for broken or broken pins or connectors or cables. If the cable is damaged and it is loose, you must replace the adapter or cable.

4. The cable is worn. Cable wear is most likely to occur at either end of the cable connecting the adapter module to the connector that connects to the computer. This may be due to the number of times the cable wraps around the adapter module or the cable is subjected to any unnecessary stress.

You may also want to see this battery

• AUTEL MS906 AUTEL Maxisys MS906 MS906BT MS906TS MS908 MS908P
• TOPCON BC-30 Dual TOPCON BT-65Q BT-65Q BT-62Q BT-66Q BT-61Q BT-60Q
• TOPCON BC-30 TOPCON BT-65Q BT-65Q BT-62Q BT-66Q BT-61Q BT-60Q
• DELL H265AM-00 Dell Optiplex 3010 7010 9010 390 790 990 MT
• GETAC VFXSV-0 GETAC VFXSV-00-12-4S2P-0 battery